MFC-10

Specifications
Documents
Parts

 

Multi-Function Charger

The MFC-10 is a universal intelligent battery charger designed to charge batteries of any chemistry or number of cells up to 38 Volts at a rate of up to 10 Amps.

As such, the MFC-10 is well suited for topping charge and boosting charge operations.

The MFC-10 is also suitable for c/10 charge operations.

Other features include:

• Optional charging hub for the automated boost charging and monitoring of up to 8 batteries.
• Storage ( nonvolatile ) of battery test profiles
• Real time clock
• Microprocessor based timer with HH:MM and MM:SS timing selection
• Interfacing to the BTAS-16 Computerized Battery Test System for monitoring, programming and control
• Interfacing to a computer by way of USB connection
• Light weight and portable design.

Specifications

Current

• Charge: constant current
  • programmable: 0 to 10.0 A, in steps of 0.1 A. (or 0.01 A in High Res Mode).

Voltage

• Constant Voltage Charge
  • programmable: 0 to 38.0 V, in steps of 0.1V

Modes

• Constant Current Charge ( all with optional Overvoltage )
  •     Single Rate
  •     Single Rate with stop at peak voltage
  •     Dual Rate
  •     Dual Rate with transfer at peak voltage
• Constant Voltage Charge
  • Constant Current followed by Constant Voltage

Controls

• Intuitive six button capacitive touch interface.

Display

• LCD readout with 4 lines x 20 characters

Timer

• Microprocessor controlled with HH:MM and MM:SS elapsed time selection

Protection

• Reverse Polarity Protection
  • Immediately warn upon a reverse polarity connection.
•  Overheat
  • Automatic supply shut off upon overheating
• Power Failure
  • Internal rechargeable battery (optional)
• Current
  • Microprocessor monitored for over and under current faults
  • Fusing for Line and Charge output.

Line Voltage

• 100 – 240 VAC ±10% and 50-60 Hz

Ambient

• +5^o C to +35^o C ( contact factory for extended temperature operation )

Included Accessories

• Battery Cable:  Cable to connect the Charger to a battery
• Fuses and Current Limiter are also included with the charger

Part Number

• 9891071001

Note:  Specifications subject to change without notice.

Documents

MFC-10 Manual-V1.2

MFC-10-25_verification_of_performance-V1.1

Parts

Parts